Skip to main content

Service

Gutter replacement

Removing an old drainage system and installing a new one sized correctly for the roof above it.

Free on-site measure. A number quoted over the phone is a guess.

Brick home with white gutters and downspouts

You probably want this if…

  • You have paid for the same repair more than twice
  • The gutters are original to a house that is decades old
  • The system overflows every storm because it was undersized from the start
  • You are re-roofing and it makes sense to do both at once

The work

What actually happens

  1. 01

    Decide honestly

    Replacement is the right call when the system is undersized, when corrosion or dents are widespread, or when the cost of repeated repairs has overtaken the cost of doing it once. It is the wrong call when two joints have failed on an otherwise sound run.

  2. 02

    Remove and inspect

    Tear-off is the only moment the fascia behind the gutter is visible. Soft or rotten board found here has to be dealt with before anything new is hung — see fascia and soffit.

  3. 03

    Re-specify rather than replicate

    Replacing like for like repeats the original mistake if the original was undersized. Roof area, valley concentration and downspout placement are worth reconsidering rather than copying.

  4. 04

    Install and clean up

    Old material is removed from site. The finished run is checked for slope and for discharge away from the foundation.

Planning the estimate

What shapes the price

Every home and scope is different. The final price depends on the measurements, material choices, access and the condition of the existing system. These are the factors Mountain Top reviews during the estimate.

Estimates are free. You receive a written specification and fixed quote before work begins; the price changes only if a genuinely hidden condition appears that could not have been seen beforehand.

  • Linear footage and number of corners
  • Removal and disposal of the existing system
  • Fascia repair discovered during tear-off
  • Choosing six-inch for a higher-capacity application
  • Number of downspouts and where they can be routed
  • Guards, if included at the same time

Around here specifically

What the desert does differently

Housing stock across the region varies enormously — from older Mesilla Valley homes with deep overhangs to newer stucco tract housing with flat or low-slope roofs and canales. Each drains completely differently, which is why replacement is a chance to fix the specification rather than reproduce it.

Brick home with white gutters and downspouts

Warranty on this work

Mountain Top labor

Three-year labor warranty on installed work

Gutter materials

Twenty-year material warranty on gutter materials

Full written coverage, exclusions, transferability and claim steps are confirmed with the quote. Manufacturer warranties are separate and vary by the exact product selected.

Questions

About gutter replacement

How long does a replacement take?
Many single-story homes are a one-day job because the gutter is formed on site rather than ordered in. Larger or two-story homes, difficult access, or fascia repair can extend that.
What happens if you find rotten fascia?
It gets shown to you before anything is done about it, with what it will take to put right. Hanging new gutter on compromised board simply moves the problem a couple of years down the road.
Should I replace gutters before or after a new roof?
Usually after, or at the same time, so drip edge and gutter line are detailed together and the new roof is not walked on afterwards.

Related work

Where we do it

El Paso, Texas and Las Cruces, New Mexico, plus the Mesilla Valley and border corridor between them.

Visit the coverage page for communities throughout the El Paso–Las Cruces borderland.

See coverage

Get a price for gutter replacement

Start a free estimate